10 Factory Areas That Are Most Required To Clean

Factories in modern times now have a much better working environment than during the previous industrial revolution.

However, factory cleanliness is still required to be maintained, maintaining cleanliness in a standard way such as cleaning floors and production equipment regularly, cleaning with special methods to keep a room sterile and free of contamination, for example, by the fumigation method.

For the best cleaning services in Spanaway, WA. You can contact Premier Janitorial Services.

A factory that is maintained in a clean condition will look good for consumers or company clients who visit and maintain the health and safety of the workers who work in the factory every day. The following are some of the areas of the factory that are almost mandatory for cleaning.

Work or production area

The first is the area used for employee work in producing the factory’s products. The production area is the main area where production activities involving machines, production tools, and various kinds of raw materials will leave residues that can cause safety problems if not cleaned.

Machines that emit smoke or steam, use of fuel, the remains of production materials, oily floor surfaces, and work areas must all be cleaned every day so that the quality of the product is not contaminated.


Warehouse is an area for storing finished products that have not been distributed or for storing materials that will be used for production.

The warehouse is also used as a storage area for production equipment and assets owned by the factory. With so many items in the warehouse, it is natural that this area is easily dirty, dusty, full of material debris, and other things that interfere with its cleanliness.

The warehouse is a factory area that is also required to be cleaned, make sure the passageways are free of dirt and oil, and ensure that the environment in the warehouse matches the needs of the items stored, for example, temperature regulation and air circulation

Cold storage room

For certain materials and products, a special storage room with a temperature that is kept at a low level is required. Should a room cold to freezing point also be cleaned?

Service Request

Even in a cold room, contamination can still occur. Storage that is not cleaned can also reduce the cooling power that works to keep the room temperature low.

Walls, ceilings, and floors

When cleaning certain areas of the factory, not only the floors are a concern, but the walls and ceilings should also be cleaned. This is because the walls and ceilings can be contaminated with dust, dirt, oil, ashes from burning, and others.

When cleaning the walls and ceiling, also clean the glass because the dirty glass will become more opaque and block sunlight from entering the room. A room with minimal sunlight will be more humid and easy to become a place for bacteria and germs to flourish.

Production material preparation area

In factories that use wet materials or organic materials to make their products, there will be a risk of contamination by organisms such as bacteria, fungi, germs, and even viruses that grow from these organic materials.

Especially for food industry factories, the food preparation area has to be cleaned, requiring more advanced methods such as fumigation. Fumigation by spraying sanitary materials with small particles can kill contaminating organisms in the room and also the equipment used.

Office area

The office area used for management is also a mandatory place to clean. Housekeeping  used for offices can be different from those used in factories where production activities take place. To clean the office, it is enough to use household equipment, and no special method is needed to do it. As long as it is done regularly by professional staff, a clean office can also increase the  branding  of the company.

R&D area

The R&D ( research and development ) area is an area that is no less important to always maintain clean conditions. Especially if the R&D activities carried out involve chemicals or organic materials to create high-quality products. These materials are very susceptible to contamination if the room is not cleaned regularly.


Toilets in a factory environment are sanitation facilities that are very important to be kept clean. This is because the toilets in the factory have quite high traffic, meaning that they are used by many people, each of whom brings their own contaminants and can be infected with other people.

Therefore, the toilet staff must maintain the toilet’s cleanliness, provide hand washing soap and tissue or hand dryer on each toilet so that contaminants do not enter the body of factory workers who use the toilet in turns.

Rest area

For workers who have worked hard, of course, the factory has a special place to rest. For example, a canteen or cafeteria that can be used as a place for lunch, or a special room for workers who want to smoke. These areas also have to be cleaned because they are part of the factory and become a place for workers’ activities.

The floor of the dining area can also be oily due to cooking activities; smoking rooms are usually dirty with cigarette butts and ashes that have slipped from the trash bins provided. For thorough sanitation and hygiene, the rest area should not be left behind for cleaning.

The area outside the factory

Not only the area inside the factory, but the area outside the factory must also be cleaned. For example, in the staircase area, the entrance area, and also the loading  area for  goods. If it is not cleaned, then of course, it can interfere with the path of people who are often carrying goods and can be dangerous.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s