The parquet looks wonderful when kept in good condition, and with a little care, you can keep its elegant appearance quite easily. Cleaning wood flooring regularly helps maintain it for longer and allows it to be the elegant centerpiece of your home. Whether you are cleaning an old wood floor or you want to refresh the new one, our guide gives you answers. Read it to learn more about natural wood flooring maintenance. Let’s begin!

For the deep cleaning services in Gig Harbor, WA, contact Premier Janitorial. It is a well-reputed cleaning company.

1. Cleaning parquet wood – preparation

Before you start the process of cleaning dirty parquet, there are a few things you need to do:

• Identify what the floor is made of. Put a little alcohol on the floor in an area to be covered and inspect the results with a cloth, napkin, or cotton wool. If the color starts to take on or feels sticky, it’s varnish or shellac. When the cloth is clean, the floor is made of polyurethane.
• Choose the cleaning product. Once you have identified the material, you can choose a suitable cleaning solution for parquet maintenance: the oil-based ones are suitable for lacquered or shellac surfaces, and the wax-based ones are for polyurethane.
• You will not always need a special cleaning product. Often warm water is enough, especially if you clean it regularly. However, it is important to have the right solution for a deep cleaning and to always perform a test on a surface that is not visible before you start.

2. Parquet maintenance: things you need

In addition to selecting the right cleaning product, there are a few things you will need to clean your hardwood floors:

• Broom, vacuum cleaner, or brush
• Mop and a bucket of hot water
• White alcohol vinegar
• Durable and absorbent Zewa Premium Standard kitchen towels

3. Step by step guide for parquet cleaning

Once you have all the products at hand, you can start the process of cleaning dirty parquet. Involve the whole family at this time – move the furniture out of the way and prepare the floors for cleaning. Follow these steps, and you will have a clean floor:

1. Wipe the parquet from dust, vacuum it and sweep it to remove dirt and debris – use the floor vacuum cleaner extension if you have one.
2. See if all surfaces are clean and sweep away the remaining sand or dust – they can scratch the parquet if they are not removed.
3. Use a damp kitchen towel to remove dust or particles that have accumulated in the corners.
4. Take the mop to start cleaning the wooden floor – regular cleaning can be done with a little warm water; however, if you do a dirty parquet cleaning, you can add 120 ml of vinegar in warm water to help remove stubborn stains. Make sure you squeeze the mop before putting it on the floor – it must be moist but not run out of water – and immediately wipe off excess water from the floor to prevent damage from it.
5. If there are dry stains that the mop cannot remove, use a damp Zewa Premium Standard kitchen towel to remove them by hand.
6. If that doesn’t work either, use the right special cleaning product – test on a small area before using vinegar or special solutions.

Everyone must have their own criteria for their dream home. However, one sure thing they didn’t want was a leak in the roof.

This will potentially cause damage to your home. Therefore, you must know how to clean the roof of the house.

For the services of roof cleaning in Olympia. You can contact Premier Janitorial Services.

Water and ceilings that infiltrate the ceiling and walls of the house will produce stains that are difficult to remove.

In addition, you should place a bucket or basin under the leak so that the falling water does not wet the floor.

Therefore, it is important for you to immediately deal with the leak.

Previously, of course, you must first find out the cause of the leak in your home. The more specific the problem you encounter, the easier it will be for you to identify a suitable solution.

One of the ways that you can apply is to clean the roof. Here are some tips for cleaning the roof of the house so it is safe from leaks.

1. Check the Shower or Roof Gutter

Cleaning the roof of the house can be started from checking the shower or gutter. These components are usually installed to drain the water out.

Unfortunately, guttering is the most difficult component to fix. When flowing water, there is usually dirt that is carried by the wind and clogs the outlet.

That is why you are obliged to check the gutters on the roof at least every six months.

Gutters that are never cleaned will cause dirt to build up, closing the holes. Even water can’t flow properly, so it seeps down and causes leaks.

2. Moldy ceilings

When the house has a leak, the falling water will infiltrate the ceiling. As a result, the ceiling of your house will be moldy.

If left untreated, the fungus will spread to other ceiling surfaces and cause the material inside to be damaged.

Especially if you have installed the ceiling since several decades ago, of course, the condition is no longer prime.

The material is also less durable when compared to today’s ceilings. Therefore, immediately check your ceiling from now on. Don’t wait for the ceiling to be damaged first.

3. Clean the Moss

Take a look at the roof of your house, are all parts of it exposed to sunlight? Roofs that are not exposed to sunlight will tend to have more humid conditions, which can lead to moss growth.

This can cause the roof to become weathered and perforated. As a result, your roof is very vulnerable to leakage. Therefore, cleaning the roof from moss can help you deal with leaks in your home.

The simplest way you can do it is with a scrubbing technique. Scrub the moss on the roof in a downward motion so that the moss peels off and falls off right away.

Always do the scrubbing technique in the same direction so that the roof remains in position.

Another way is to use power washing techniques or certain pressurized water. You can adjust the water to strength between 1200-2000 psi. Flush the water in a decreasing motion.

4. Check Roof Flashing

The flashing component is located under the connection between the roof and ceiling. The material is made of aluminum which can function to prevent water from seeping into the house.

Basically, all flashing is designed as waterproof components, but it does not rule out the possibility for them to undergo an oxidation process.

As a result, the flashing is worn and rusty. Not only that, a damp ceiling can also cause the flashing to become loose, causing water leaks. Check if your flashing has started to rust.

You can grease it with anti-rust putty according to the required level.

5. Decaying Fascia Board

It’s no surprise that your fascial board starts to rot, given that this wooden component sits behind the shower and is less visible.

Exposure to light can slowly damage the fascia board, especially when it’s raining. Trapped water when the courtship is blocked will aggravate the condition of your fascial board.

To correct this, you can test for signs of rot by pressing the fascia board with the tip of a blunt screwdriver. If your fascial board is broken, then it is imperative that you replace it with a new one.

Like a term that says to prepare an umbrella before it rains, you can start checking your roof’s condition from now on to avoid leaks.